Material: aluminum alloy, mesh cloth, sponge
Can be used for 16-20 ” seat wide wheelchair, sitting stool
According to the actual situation of users to adjust the angle of the head and the height of the head pillow
Product Features: U-type sponge mesh pillow, anti-side inverted, can reduce the head pressure, more breathable, light, more refreshing
Aluminum alloy cage, lightweight and firm
3D Breathable mesh cloth, breathable not stuffy

Instructions: The arc-shaped base is loaded into the wheelchair left and right hand tube, insert the U-shaped base on the left and right side of the arc base, adjust the width for the size of the head tube, insert the head by tube to the marbles jump out, rotate U-shaped base adjustment head back and forth position, after determining the position, lock the knob with the arc base and the knob of the U-shaped base; top and bottom move head pillow to fit height.
Use tip: Press the head directly on the tube pop-up, pull out the first, do not take off the U-shaped and curved base, wheelchair can be directly closed
Scope of application: Wheelchair or seat stool push the diameter of the tube should be 22.2-24.5 mm, only to support the installation of circular tube. A space with a length of about 5CM is fitted with a fixed clamp, and the seat width is between 16 inch and 20 inches–that is, between the two sides pushing the inner distance between the 40-50cm; electric Wheelchair please pay special attention to whether to meet the push-push tube requirements!

Product Features

• High quality U-type sponge mesh pillow, anti-side inverted, can reduce the head pressure, more breathable, light, more refreshing.
• 3D Breathable mesh cloth, breathable not stuffy，aluminum alloy cage, lightweight and firm.
• Can be used for 16″-20″ seat wide wheelchair, sitting stool（（Does not include wheelchairs））.
• According to the actual situation of users to adjust the angle of the head and the height of the head pillow.
• Scope of application: Wheelchair or seat stool push the diameter of the tube should be 22.2-24.5 mm, only to support the installation of circular tube. A space with a length of about 5CM is fitted with a fixed clamp, and the seat width is between 16 inch and 20 inches–that is, between the two sides pushing the inner distance between the 40-50cm; electric Wheelchair please pay special attention to whether to meet the push-push tube requirements!